BRPMZ - EYC SEALING COMPOUND
- MSDS: BRPMZ
- Manufacturer: O Z GEDNEY CO
- Product Name: EYC SEALING COMPOUND
- National Stock Number: 8030-00N039725
Product Identification
Product ID:EYC SEALING COMPOUND
MSDS Date:01/18/1989
FSC:8030
NIIN:00N039725
MSDS Number: BRPMZ
Responsible Party
TERRYVILLE, CT 06786
US
Emergency Phone: 203-584-0571
Info Phone: 203-584-0571
Cage: IO485
Contractor
Telephone: 203-584-0571
Cage: IO485
Ingredients
FLOW CONTROL AGENT
Fraction By Weight: 1%
CALCIUM SULFATE HEMIHYDRATE
Fraction By Weight: 55%
ACGIH TLV: 10 MG/M3 (MFR)
SILICIC ACID, CALCIUM SALT; (CALCIUM SILICATE)
CAS: 1344-95-2
RTECS: VV9150000
Fraction By Weight: 44%
OSHA PEL 1O MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION OF EYES AND SKIN.
DUST IS CONSIDERED A NUISANCE DUST. SENSITIVE SKIN AREAS ARE MORE
LIKELY TO BE IRRITATED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLOOD IMMEDIATLEY WITH WATER FOR AT LEAST 15 MINUTES
AND CONTACT MD. SKIN: WASH FOR AT LEAST 15 MINUTES. INGEST: PRODUCT
HARDENS WHEN WETTED. MAY RESULT IN OBSRUCTION. CONTACT MD
IMMEDIATELY. IN HAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTF RESP).
Fire Fighting
Flash Point:NOT FLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Accidental Release
Spill Release Procedures:SWEEP UP & PLACE IN SUITABLE CONTAINERS. AVOID
CREATING EXCESSIVE DUST. DO NOT WASH SLURRY DOWN DRAINS SINCE THIS
MAY CAUSE PLUGGING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN DRY LOCATION AWAY FROM WATER
OR HIGH HUMIDITY CONDITIONS TO AVOID PREMATURE HARDENING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:IF DUST IS ANNOYING, USE NIOSH/MSHA APPROVED
DUST RESPIRATOR OR IF ABOVE TLV.
Ventilation:MECHANICAL: IF DUST IS EXCESSIVE OR IF OVER TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:WASH HANDS AFTER USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:2.7 (H*2O=1)
pH:9.0
Solubility in Water:2%
Appearance and Odor:GRAY ODORLESS POWDER.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:THIS IS NOT HAZARDOUS WASTE. DISPOSE AS SOLID
WASTE IN LANDFILL IN ACCORDANCE WITH LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.